Abstract  The hydrogenation of methyl oleate (methyl cis-9-octadecenoate) to oleyl alcohol (methyl cis-9-octadecen-1-ol) was studied in the presence of a bimetallic CoSn supported over zinc oxide catalyst in a stainless steel batch reactor at 270 degrees C and 8.0 MPa of hydrogen. The active species in the reduction of methyl oleate into unsaturated alcohols was CoSn2. In order to increase the amount of these active species the nature of the precursor salts was studied. These results have shown that the carbonyl cobalt precursor is the optimum salt for the hydrogenation of methyl oleate into unsaturated alcohol since the selectivity to unsaturated alcohol reached 55% at 80% of conversion. Moreover, the selectivity is governed by the reduction of the heavy esters (oleyl oleate and oleyl stearate) formed, which can occur in the presence of small Co-Sn-2 particles, well dispersed on the catalyst surface and with a high surface content. (C) 2012 Elsevier B.V. All rights reserved.

Abstract  The purpose of this work was to develop a novel polyurethane hydrogel system for sustained drug release, which could be used as a vaginal drug-delivery vehicle. The blank polyurethane hydrogels were synthesized by a polyol oligomeric, a diisocyanate and a triol (used as cross-linking agent). In order to improve the swelling ability of a polyurethane hydrogel, a small amount of 1-octadecanol was added. Additionally, the structure, mechanical properties and thermal properties of polymers were assessed by FT-IR, WAXD, DSC and mechanical tests. The results show that no more than 2.5 wt% of 1-octadecanol additives is sufficient to affect the release profile without changing the structure and mechanical properties of the polyurethane hydrogels obviously. Tinidazole was chosen as a model drug, the release data of drug from polyurethane hydrogels were fitted using the Ritger-Peppas equation and the result showed that it was non-Fickian diffusion, which means that the drug release was controlled by both swollen control and diffusion control. In conclusion, our work proves that the synthesized polyurethane hydrogel modified by 1-octadecanol may be a promising sustained release drug carrier.

Abstract  The effects of the oil phase as a mixture (binary, ternary) on the emulsion droplet size were investigated. The binary trials were performed with the aid of simplex lattice design with constraints. Droplet diameter was evaluated in terms of the oil phase viscosity and the interfacial tension between oil phase and the aqueous phase. As a result it could be shown that increasing the oil phase viscosity as a function of castor oil concentration led to a greater increase in particle size. At the same time, decreasing the interfacial tension of the oil phase as a function of oleic acid or oleic alcohol was shown to have a negligible effect on the particle size of the dispersed phase. A further aim was to find out a formulation by using a ternary oil phase resulting in a stable emulsion which could pass the autoclaving process. It was ascertained that oleic acid as a part of the oil phase led to proper formulation showing a satisfactory stability.

Abstract  Sterols, n-alkanols, organic carbon (OC), C/N ratios and carbon isotope data (delta 13C) were investigated in sediments of the urban Capibaribe River estuary, NE Brazil, in order to assess allochthonous and autochthonous sources of organic matter (OM). Sedimentary OC values are high, but C/N ratios and delta 13C data generally fall within the range of values reported in other riverine systems, and suggest mixed inputs from aquatic and terrestrial matter. Mean values for total 4-desmethyl sterols and high molecular weight (HMW) n-alkanols are 11.0 micrograms/g and 2.8 micrograms/g, respectively. Sterols are found at highest levels in areas of enhanced urban outfalls. They can be related to major planktonic species growing in riverine waters. Stanol/stenol ratios suggest a high degree of alteration of the autochthonous OM as a result of elevated temperatures and microbiological proliferation. Even though sterols suggest the importance of autochthonous inputs to the river, HMW n-alkanols indicate major terrigenous accumulation at the mouth and 10 km upriver. Coprostanol and epicoprostanol levels are comparable to other sewage contaminated hydrosystems, but not as high as expected given the importance of sewage outfalls and low riverine water discharge. However, high (coprostanol)/(coprostanol + cholestanol) ratio values indicate that fecal contamination is significant.

Abstract  The amount and characterization of phytosterol and other minor components present in three Indian minor seed oils, mahua (Madhuca latifolia), sal (Shorea robusta) and mango kernel (Mangifera indica), have been done. Theses oils have shown commercial importance as cocoa-butter substitutes because of their high symmetrical triglycerides content. The conventional thin layer chromatography (TLC), gas chromatography (GC) & gas chromatography-mass spectroscopy (GC-MS) techniques were used to characterize the components and the high performance thin layer chromatography (HPTLC) technique was used to quantify the each group of components. The experimental data showed that the all the three oils are rich in sterol content and among all the sterols, beta-sitosterol occupies the highest amount. Sal oil contains appreciable amount of cardenolides, gitoxigenin. Tocopherol is present only in mahua oil and oleyl alcohol is present in mango kernel oil. Hydrocarbon, squalene, is present in all the three oils. The characterization of these minor components will help to detect the presence of the particular oil in specific formulations and to assess its stability as well as nutritional quality of the specific oil.

Abstract  The magnetic needle interfacial shear rheometer is a valuable tool for the study of the mechanical properties of thin fluid films or monolayers. However, it is difficult to differentiate the interfacial and subphase contributions to the drag on the needle. In principle, the problem can be addressed by decreasing the needle diameter, which decreases the bulk contribution while the interfacial contribution remains essentially the same. Here we show the results obtained when using a new type of needle, that of magnetic microwires with diameter approximately 10 times thinner than for commercial needles. We show that the lower inertia of the microwires calls for a new calibration procedure. We propose such a new calibration procedure based on the flow field solution around the needle introduced in refs 1 and 2. By measuring thin silicone oil films with well-controlled interfacial viscosities as well as eicosanol (C20) and pentadecanoic acid (PDA, C15) Langmuir monolayers, we show that the new calibration method works well for standard needles as well as for the microwire probes. Moreover, we show that the analysis of the force terms contributing to the force on the needle helps to ascertain whether the measurements obtained are reliable for given surface shear viscosity values. We also show that the microwire probes have at least a 10-fold-lower resolution limit, allowing one to measure interfacial viscosities as low as 10(-7) N·m/s.

Abstract  The primary objective was to characterize Indian Coriandrum sativum L. foliage (Vulgare alef and Microcarpum DC varieties) and its radical scavenging activity. Foliage of Vulgare alef and Microcarpum DC contained ascorbic acid (1.16 ± 0.35 and 1.22 ± 0.54 mg/g), total carotenoids (1.49 ± 0.38 and 3.08 ± 1.2 mg/g), chlorophyll 'a' (8.23 ± 2.4 and 12.18 ± 2.9 mg/g), chlorophyll 'b' (2.74 ± 0.8 and 4.39 ± 1.3 mg/g) and total chlorophyll (10.97 ± 2.6 and 16.57 ± 3.2 mg/g). The polyphenol content was 26.75 ± 1.85 and 30.00 ± 2.64 mg/g in Vulgare alef and Microcarpum DC, respectively. Ethanol extracts (200 ppm) of alef and Microcarpum DC showed higher radical scavenging activity of 42.05 ± 2.42 % and 62.79 ± 1.36 % when compared with 95 % butylated hydroxyanisole. The principal component analysis results indicated that e-nose can distinguish the volatiles effectively. Quantitative descriptive sensory analysis showed that Microcarpum DC variety is superior to Vulgare alef variety. Nearly 90 % of the flavour compounds present were identified by GC-MS in both varieties. The principal component identified in both the varieties were decanal (7.645 and 7.74 %), decanol < n- > (25.12 and 39.35 %), undecanal (1.20 and 1.75 %), dodecanal (7.07 and 2.61 %), tridecen-1-al < 2E > (6.67 and 1.21 %), dodecen-1-ol < 2E- > (16.68 and 8.05 %), 13-tetradecenal (9.53 and 8.60 %), tetradecanal (5.61 and 4.35 %) and 1-octadecanol (1.25 and 3.67 %).

Abstract  The genus Astragalus is a rich source of a variety of biologically active compounds including phenols, saponins, polysaccharides and essential oils. The present study was conducted to determine ontogenetic variation of the volatile organic compounds as well as total phenolic contents and antioxidant activity in leaves of A. compactus. The leaves of plant were harvested at vegetative, flowering and fructification stages and were analyzed by gas chromatography coupled with mass spectrometry (GC-MS). Total phenolic content (TPC) was determined using the Folin-Ciocalteau reagent and the antioxidant capacity was evaluated with the 1,1-diphenyl-2-picrylhydrazyl (DPPH) test. Different classes of volatile compounds were identified including alcohols, esters, hydrocarbons, sterols and terpenoides. Significant variation of these compounds was found during phenological stages of development. Sterols and hydrocarbons were the main components of essential oils at the vegetative stage. The presence of terpenoides (phytol) and alcohols (docosanol) was significant at the flowering stage. Fructification phase was characterized by the high content of sterols and hydrocarbons and absence of phytol. The antioxidant activity and phenolic content were related to the physiological stage and the highest amount detected at fructification phase. The ontogenetic variations of phenolic contents and antioxidant properties are largely contributed by climatic factors such as temperature and solar radiation.

Abstract  Maleic anhydride was modified with long chain alcohols (1-hexadecanol, 1-octadecanol, 1-eicosanol and docosyl) to their corresponding amphiphilic mono-L cis-butene dicarboxylates (L = hexadecyl, octadecyl, eicosyl and docosyl). Subsequently, corresponding amphiphilic lanthanide (Y3+, Eu3+) complexes with these four mono-L cis-butene dicarboxylate ligands [Ln(L')3, Ln = Eu, Y; L' = MAH, MAO, MAE, MAD] were synthesized. Then, under heating at various temperatures (700, 800, 900, 1000, and 1,100 degrees C), twenty kinds of nanosized Y2O3:Eu3+ phosphors were prepared using these four as-derived amphiphilic lanthanide (Y3+, Eu3+) complexes as precursors. All four complexes can form nanosized micelle-like aggregates by special self-assembly. Results show that, under heating at 1,000 degrees C, the four Y2O3:Eu3+ phosphors present more regular dispersion particle-like morphology, and the particle size is in the range of 30-80 nm. They exhibit an especially strong emission at 609 nm, and the luminescence intensity of the sample derived from MAD at 1,000 degrees C is best.

Abstract  Surface layers of natural and technical amphiphiles, e.g., octadecanol, stearic acid and related compounds as well as perfluorinated fatty alcohols (PFA), have been investigated on the surface of acoustically levitated drops. In contrast to Langmuir troughs, traditionally used in the research of surface layers at the air-water interface, acoustic levitation offers the advantages of a minimized and contact-less technique. Although the film pressure cannot be directly adjusted on acoustically levitated drops, it runs through a wide pressure range due to the shrinking surface of an evaporating drop. During this process, different states of the generated surface layer have been identified, in particular the phase transition from the gaseous or liquid-expanded to the liquid-condensed state of surface layers of octadecanol and other related amphiphiles. Characteristic parameters, such as the relative permeation resistance and the area per molecule in a condensed surface layer, have been quantified and were found comparable to results obtained from surface layers generated on Langmuir troughs.

Abstract  The primary and secondary objectives of this study were to develop and evaluate the predictability of in vitro-in vivo correlation models for theophylline sustained release (SR) granules. Theophylline SR granules meeting the USP Drug Release Test criteria were prepared using ethyl cellulose (EC) and/or stearyl alcohol (SA) and the wet granulation method. In vitro dissolution studies of granule formulation were performed, and a commercial dosage form was prepared using USP XXIII apparatus II at pH 4.5. Differences and similarities between in vitro dissolution curves were compared using both model-dependent (t-test) and -independent (f1, f2 test) statistical techniques, and it was shown that the three dissolution profiles i.e model-dependent, model-independent, and methods based on ANOVA were very similar. The in vivo performance of the commercial dosage form was tested by oral route using male rabbits and in vitro-in vivo correlations were established. This study indicates that the dosage forms with similar in vitro dissolution profiles may have a similar in vivo performance, and that this performance could be estimated using appropriate correlation equations.

Abstract  Oleyl alcohol was complexed with new amphiphilic polyvinylalcohol derivatives with the aim of increasing its aqueous solubility, thus improving bioavailability and favoring its antitumor activity. Water-soluble amphiphilic polymers were prepared by polyvinyl alcohol (PVA) substitution with oleyl chains through a succinyl spacer at 2% and 3% substitution degree. The complexes were obtained by spray-drying hydroalcoholic solutions of the substituted polymers and free oleyl alcohol at different weight ratios (3:1; 5:1; 10:1 w/w). The main physicochemical characteristics of the complexes were analyzed and correlated to the cytotoxic activity of oleyl alcohol toward tumor cell lines. The complexes strongly increased the aqueous solubility of oleyl alcohol and provided oleyl alcohol release in the presence of extractive conditions (simulating in vivo absorption). The complexes obtained by 10:1 polymer:fatty alcohol weight ratio offered higher release rates than the 5:1 and 3:1 ratios, respectively. Complexation also increased oleyl alcohol cytotoxicity toward tumor cells due to increased availability of the active molecule in the aqueous phase. Pure polymers were found to be biocompatible and no toxic effect was detected up to the highest concentration used in the present study (500 mu g/ml). The complexation of oleyl alcohol with the polymers analyzed here efficiently increased the availability of the fatty alcohol in aqueous environment. The enhanced cytotoxicity toward tumor cells of the complexed oleyl alcohol and the polymer biocompatibility make these amphiphilic PVA derivatives interesting candidates for soluble pharmaceutical formulations containing hydrophobic drugs whose therapeutic potential is often underestimated due to unsuitable levels of their aqueous solubilization.

Abstract  Fast-disintegrating (FD) tablets containing nicorandil-loaded dry emulsions were prepared and their controlled-release properties were examined and compared with the plain FD tablets (FD tablets without dry emulsions) and commercial tablets. The dry emulsions were prepared with myristyl alcohol and stearyl alcohol and their property was modified by mixing the ratio of the two alcohols. Disintegration time of the prepared FD tablets was sufficiently fast (i.e., 12 to 23 s). In vitro release of nicorandil from the FD tablets containing the dry emulsions was sustained over 6 h, while that from plain FD and commercial tablets was complete within 5 min. In vivo absorption of nicorandil from the tablets was evaluated by oral administration in beagle dogs. FD tablets containing dry emulsions showed a similar AUC, lower Cmax, and delayed Tmax compared to the plain FD and commercial tablets. These results suggest that the dry emulsion-loaded FD tablets can be utilized to improve the sustained-release property of active drugs.

Abstract  It was shown by the combination of thermogravimetric analysis and Karl Fisher titrations that temperatures in excess of 200 degrees C are required to remove tightly bound water from proteins. The heating of enzymes to this temperature caused no cleavage of the polypeptide chains and very little, if any, chemical degradation of particular amino acid residues as judged by electrophoretic and amino acid analysis respectively. It was hypothesised that those enzymes that require very little water for their catalytic activity, should remain active at such elevated temperatures provided that they can be stabilised against thermodenaturation. This conclusion has been verified by the observation that immobilised Candida antarctica lipase catalysed transesterification of octadecanol with palmityl stearate at 130 degrees C for a considerable period of time.

Abstract  A two-phase aqueous/organic partitioning bioreactor scheme was used to degrade mixtures of toluene and benzene, and toluene and p-xylene, using simultaneous and sequential feeding strategies. The aqueous phase of the partitioning bioreactor contained Pseudomonas sp. ATCC 55595, an organism able to degrade benzene, toluene and p-xylene simultaneously. An industrial grade of oleyl alcohol served as the organic phase. In each experiment, the organic phase of the bioreactor was loaded with 10.15 g toluene, and either 2.0 g benzene or 2.1 g p-xylene. The resulting aqueous phase concentrations were 50 mg/l, 25 mg/l and 8 mg/l toluene, benzene and p-xylene respectively. The simultaneous fermentation of benzene and toluene consumed these compounds at volumetric rates of 0.024 g l-1 h-1 and 0.067 g l-1 h-1, respectively. The simultaneous fermentation of toluene and p-xylene consumed these xenobiotics at volumetric rates of 0.066 g l-1 h-1 and 0.018 g l-1 h-1, respectively. A sequential feeding strategy was employed in which toluene was added initially, but the benzene or p-xylene aliquot was added only after the cells had consumed half of the initial toluene concentration. This strategy was shown to improve overall degradation rates, and to reduce the stress on the microorganisms. In the sequential fermentation of benzene and toluene, the volumetric degradation rates were 0.056 g l-1 h-1 and 0.079 g l-1 h-1, respectively. In the toluene/p-xylene sequential fermentation, the initial toluene load was consumed before the p-xylene aliquot was consumed. After 12 h in which no p-xylene degradation was observed, a 4.0-g toluene aliquot was added, and p-xylene degradation resumed. Excluding that 12-h period, the microbes consumed toluene and p-xylene at volumetric rates of 0.074 g l-1 h-1 and 0.025 g l-1 h-1, respectively. Oxygen limitation occurred in all fermentations during the rapid growth phase.

Abstract  n-Docosanol-treated cells resist infection by a variety of lipid-enveloped viruses including the herpesviruses. Previous studies of the mechanism of action demonstrated that n-docosanol inhibits an event prior to the expression of intermediate early gene products but subsequent to HSV attachment. The studies reported here indicate that n-docosanol inhibits fusion of the HSV envelope with the plasma membrane. Evidence suggests that antiviral activity requires a time-dependent metabolic conversion of the compound. Cellular resistance to infection declines after removal of the drug with a t1/2 of approximately 3 h. Reduced expression of viral genes in n-docosanol-treated cells was confirmed by a 70% reduction in expression of a reporter gene regulated by a constitutive promoter inserted into the viral genome. Inhibited release in treated cells of virion-associated regulatory proteins--an immediate post entry event--was indicated by a 75% reduction in the expression of beta-galactosidase in target cells carrying a stably transfected lacZ gene under control of an HSV immediate--early promoter. Finally, the fusion-dependent dequenching of a lipophilic fluorescent probe, octadecyl rhodamine B chloride, inserted into the HSV envelope was significantly inhibited in treated cells. Inhibition of fusion between the plasma membrane and the HSV envelope, and the subsequent lack of replicative events, may be the predominant mechanism for the anti-HSV activity of n-docosanol.

Abstract  Part I of this article presents results of an experimental study on gas-phase nucleation for three model solutes and their solvent, propylene glycol (PG), with variables being solute concentration and the nature of the solute substance. A single manifestation of an aerosol generator, which forms condensation aerosols by cooling of hot vapor issuing from an electrically heated, pumped capillary, is described and used for all experiments. The effects of solute concentration and solute type were studied for deoxycorticosterone (DOC), benzil (BZ), and phenyl salicylate (PhS). Suppression of homogeneous nucleation and occurrence of heterogeneous condensation of the solvent was observed at different solute concentrations for BZ, PhS, and DOC. The nature and concentration of the solute dissolved in the solvent was shown to determine the final particle size distribution of the condensed aerosol. In the case of the least volatile solute, DOC, solute aerosol and total aerosol size distributions were identical at low solute concentrations. A transitional concentration region then existed in which a bimodal solute aerosol was formed, followed at high concentrations by increasing separation of the solvent-dominated aerosol size distribution and that of the solute.

In Part II of this article, the effect of DOC dissolution in different solvents was studied at fixed solute concentration. The effects of six glycol solvents-i.e., PG, ethylene glycol (EG), dipropylene glycol (DPG), diethylene glycol (DEG), triethylene glycol (TEG), and tetraethylene glycol (TetEG)-and three nonglycol solvents-i.e., dimethyl sulfoxide (DMSO), formamide (FORM), and oleyl alcohol (OA)-were studied, as these affected the resultant aerosol sizes. Suppression of total aerosol mass median aerodynamic diameter (MMAD) was observed on dissolution of 0.5% w/w DOC in each solvent, although suppression occurred to different extents. It was shown that the boiling point or volatility of the solvent used to dissolve the less volatile DOC had an effect on the final particle size distribution of the condensed aerosol and whether the aerodynamic size distributions for the solute and the total aerosol were the same or different.

Abstract  Monolayer products can potentially provide a cost effective solution for reducing evaporative loss from water storages. Commercial adoption has been low, due to the extreme variability of product performance. In this study, the efficiency of three monolayer compounds (stearyl alcohol, ethylene glycol monooctadecyl ether and the commercial product WaterSavr) in reducing evaporation were tested at three controlled wind speeds inside a glasshouse in class-A evaporation pans. Water levels and micrometeorological conditions were monitored to document the impact of prevailing atmospheric conditions on monolayer performance. The evaporation reduction ranged from 13 to 71 % depending on the product and micrometeorological conditions. The ethylene glycol monooctadecyl ether was most effective reducing evaporation across all wind speeds. Atmospheric conditions markedly affected monolayer products' performance. All monolayers were most effective when the wind was sufficient to drive evaporative loss but lacked the force to disrupt the condensed monolayer (1.5 m s(-1)). Continuous wind of 3 m s(-1) disrupted the condensed monolayer and substantially decreased the product performance. Without wind, the resistance to evaporation induced by monolayers had little additional effect. When atmospheric evaporation demand was very low, the evaporation suppression efficiency was minimized. High temperatures and high incoming radiation negatively affected the persistence of the condensed monolayer and decreased product performance. These results highlight the importance of analysing micrometeorological conditions when assessing product performance.

Abstract  Alcohol ethoxylates (AEs) are an important group of nonionic surfactants. Commercial AEs consist of a mixture of several homologues of varying carbon chain length (Cx) and degree of ethoxylation (EOy). The major disposal route of AE is down the drain to municipal wastewater treatment plants that discharge into receiving surface waters. Sorption of AE homologues onto activated sludge and river water solids is an important factor in assessing exposure of AE in the environment. This study presents the experimental determination of sorption coefficients for a wide array of AE homologues including five alcohols under environmentally relevant conditions and combines these data with literature data to generate a predictive model for the sorption of AEs in the environment. These results demonstrate that sorption can be effectively modeled using a log Kd vs. Cx and EOy predictive equation having the form log Kd = 0.331C - 0.00897EO - 1.126(R2 = 0.64).

Abstract  This study was conducted at the Horticulture Department of Cukurova University, Adana, Turkey, in 2010 to determine the volatile aroma compounds of Morchella mushroom. Fresh samples of Morchella esculenta (Sample 1) and Morchella elata (Sample 2) were collected from Canakkale (Sample 1) and Mersin (Sample 2) provinces in Turkey in the spring of 2010. Volatile aroma compounds were analyzed by headspace gas chromatography mass spectrometry (HS-GC/MS). A total of 31 aroma compounds were identified in the 2 analyzed samples: 7 alcohols, 7 esters, 7 ketones, 3 acids, 2 aldehydes, 1 terpene, phenol, 1-propanamine, geranyl linalool, and quinoline. Seventeen aroma components were identified in Sample 1, and 18 compounds were found in Sample 2. Phenol was determined as the major aroma compound in both Sample 1 and Sample 2, at 50.888% and 58.293% content, respectively. Alcohols, especially 1-octen-3-ol, were detected as the second major aroma components in Sample 1 and Sample 2, at 15.500% and 5.660% content, respectively. Carbamic acid, methyl ester was found only in Sample 1, at 11.379% content. The aroma components detected in the two samples differed. 1-Octadecanol; cyclooctylalcohol; trans-2-undecen-1-ol; butanoic acid, butyl ester (CAS); carbamic acid, methyl ester; 2-ethylhexyl-2-echylhexanoate; phthalic acid, decyl isobutyl ester, 2,2,4-trimethyl-1,3-pentanediol diisobutyrate; decanal; nonanal; 7,9-di-tert-butyl-1-oxaspiro(4.5)deca-6,9-diene-2,8-dione; 2,5-cyclohexadiene-1,4-dione; 2,6-bis(1,1-dimethylethyl); and trans-alpha-bisabolene were detected only in Sample 1. Ethanol; silanediol, 2-methylaminoethanol; L-alanine, ethyl ester; carbonic acid, dodecyl isobutyl ester; acetic acid; butanoic acid; 2,3,4H-pyran-4-one; 5,9-undecadien-2-one; cyclooctene; 2-cyclopenten-1-one; 1-propanamine; geranyl linalool; and quinoline were determined only in Sample 2.

Abstract  Mass spectrometry has become an indispensable tool for the global study of metabolites (metabolomics), primarily using electrospray ionization mass spectrometry (ESI-MS). However, many important classes of molecules such as neutral lipids do not ionize well by ESI and go undetected. Chemical derivatization of metabolites can enhance ionization for increased sensitivity and metabolomic coverage. Here we describe the use of tris(2,4,6,-trimethoxyphenyl)phosphonium acetic acid (TMPP-AA) to improve liquid chromatography (LC)/ESI-MS detection of hydroxylated metabolites (i.e. lipids) from serum extracts. Cholesterol which is not normally detected from serum using ESI is observed with attomole sensitivity. This approach was applied to identify four endogenous lipids (hexadecanoyl-sn-glycerol, dihydrotachysterol, octadecanol, and alpha-tocopherol) from human serum. Overall, this approach extends the types of metabolites which can be detected using standard ESI-MS instrumentation and demonstrates the potential for targeted metabolomics analysis.

Abstract  Mitotic checkpoint impairment is present in human lung cancers with chromosomal instability (CIN). Spindle-checkpoint genes have been reported to be mutated in several human cancers; but these mutations are infrequent. Recent reports suggest that the hBUBR1 gene may play an important role in mitotic checkpoint control and in mitotic checkpoint impairment in human cancers. We analyzed the expression of hBUBR1 in lung cancer cell lines using real time quantitative RT-PCR. The expression of BUBR1 was found to be up-regulated in all of these cell lines. In addition, we cloned and characterized the promotor region of hBUBR1 and determined its genomic structure, which includes 23 exons. The open reading frame (ORF) of the hBUBR1 gene comprises exons 1 through 23. There are GC-rich regions located at the flanking region and about 150 bp upstream from exon 1. The promoter region (424 bp upstream from exon 1) showed promoter activity and includes multiple transcription factor consensus binding motifs, including those for Sp1, Nkx-2, CdxA, SRY, MyoD, Ik-2, HNF-3b, Staf, Oct-1, Nkx-2, v-Myb, and AML 1a. Multiple pathways leading to activation of those binding factors may contribute to hBUBR1 gene transcription. Knowledge of the genomic structure and the promoter region of the hBUBR1 gene will facilitate investigation of its role in mitotic checkpoint control and tumor progression in human cancers. (C) 2002 Elsevier Science Ireland Ltd. All rights reserved.