Abstract  Selective redox degradation of chlorinated aliphatics by Fenton reaction in pyrite suspension was investigated in a closed system. Carbon tetrachloride (CT) was used as a representative target of perchlorinated alkanes and trichloroethylene (TCE) was used as one of highly chlorinated alkenes. Degradation of CT in Fenton reaction was significantly enhanced by pyrite used as an iron source instead of soluble Fe. Pyrite Fenton showed 93% of CT removal in 140 min, while Fenton reaction with soluble Fe(II) showed 52% and that with Fe(III) 15%. Addition of 2-propanol to the pyrite Fenton system significantly inhibited degradation of TCE (99% to 44% of TCE removal), while degradation of CT was slightly improved by the 2-propanol addition (80-91% of CT removal). The result suggests that, unlike oxidative degradation of TCE by hydroxyl radical in pyrite Fenton system, an oxidation by the hydroxyl radical is not a main degradation mechanism for the degradation of CT in pyrite Fenton system but a reductive dechlorination by superoxide can rather be the one for the CT degradation. The degradation kinetics of CT in the pyrite Fenton system was decelerated (0.13-0.03 min(-1)), as initial suspension pH decreased from 3 to 2. The formation of superoxide during the CT degradation in the pyrite Fenton system was observed by electron spin resonance spectroscopy. The formation at initial pH 3 was greater than that at initial pH 2, which supported that superoxide was a main reductant for degradation of CT in the pyrite Fenton system.

Abstract  AIM: To evaluate the hepatoprotective roles of (Z)-5-(4-methoxybenzylidene)thiazolidine-2,4-dione (SKLB010) against carbon tetrachloride (CCl₄)-induced acute and chronic liver injury and its underlying mechanisms of action.

METHODS: In the first experiment, rats were weighed and randomly divided into 5 groups (five rats in each group) to assess the protective effect of SKLB010 on acute liver injury. For induction of acute injury, rats were administered a single intraperitoneal injection of 2 mL/kg of 50% (v/v) CCl₄ dissolved in olive oil (1:1). Group 1 was untreated and served as the control group; group 2 received CCl₄ for induction of liver injury and served as the model group. In groups 3, 4 and 5, rats receiving CCl₄ were also treated with SKLB010 at doses of 25, 50 and 100 mg/kg, respectively. Blood samples were collected at 6, 12 and 24 h after CCl₄ intoxication to determine the serum activity of alanine amino transferase. Tumour necrosis factor-α (TNF-α), interleukin-1β (IL-1β) were determined using enzyme-linked immunosorbent assay. At 24 h after CCl₄ injection, liver fibrogenesis was evaluated by hematoxylin-eosin (HE) staining and immunohistochemical analyses. Cytokine transcript levels of TNF-α, IL-1β and inducible nitric oxide synthase in the liver tissues of rats were measured using a reverse transcriptase reverse transcription-polymerase chain reaction technique. In the second experiment, rats were randomly divided into 2 groups (15 rats in each group), and liver injury in the CCl₄-administered groups was induced by a single intraperitoneal injection of 2 mL/kg of 50% (v/v) CCl₄ dissolved in olive oil (1:1). The SKLB010-treated groups received oral 100 mg/kg SKLB010 before CCl₄ administration. Five rats in each group were sacrificed at 2 h, 6 h, 12 h after CCl₄ intoxication and small fortions of livers were rapidly frozen for extraction of total RNA, hepatic proteins and glutathione (GSH) assays. In the hepatic fibrosis model group, rats were randomly divided into 2 groups (5 rats each group). Rats were injected intraperitoneally with a mixture of CCl₄ (1 mL/kg body weight) and olive oil [1:1 (v/v)] twice a week for 4 wk. In the SKLB010-treated groups, SKLB010 (100 mg/kg) was given once daily by oral gavage for 4 wk after CCl₄ administration. The rats were sacrificed one week after the last injection and the livers from each group were harvested and fixed in 10% formalin for HE and immunohistochemical staining.

RESULTS: In this rat acute liver injury model, oral administration of SKLB010 blocked liver tissue injury by down-regulating the serum levels of alanine aminotransferase, suppressing inflammatory infiltration to liver tissue, and improving the histological architecture of liver. SKLB010 inhibited the activation of NF-κB by suppressing the degradation of IκB, and prevented the secretion of pro-inflammatory mediators such as tumor necrosis factor-α, interleukin-1β, and the reactive free radical, nitric oxide, at the transcriptional and translational levels. In this chronic liver fibrosis model, treatment with 100 mg/kg per day SKLB010 attenuated the degree of hepatic fibrosis and area of collagen, and blocked the accumulation of smooth-muscle actin-expressed cells.

CONCLUSION: These results suggest that SKLB010 is a potent therapeutic agent for the treatment of CCl₄-induced hepatic injury.

Abstract  The present study aims to evaluate the anti-HCV activity of hotwater extract from Platycodon grandiflorum (BC703) with HCV genotype 1b subgenomic replicon system and investigate its hepatoprotective activity on carbon tetrachloride (CCl(4))-induced acute liver damage in mice. BC703 produced significant hepatoprotective effects against CCl(4)-induced acute hepatic injury by decreasing the activities of serum enzymes, nitric oxide and lipid peroxidation. Histopathological studies further substantiated the protective effect of BC703. Furthermore, BC703 inhibited the HCV RNA replication with an EC(50) value and selective index (CC(50)/EC(50)) of 2.82 µg/mL and above 35.46, respectively. However, digested BC703 using a simulated gastric juice showed poor protective effect against CCl(4)-induced hepatotoxicity in mice and decreased anti-HCV activity as compared to the intact BC703. Although further studies are necessary, BC703 may be a beneficial agent for the management of acute hepatic injury and chronic HCV infection.

Abstract  The myeloid C-type lectin receptor Dectin-2 directs the generation of Th2 and Th17 immune responses to the house dust mite Dermatophagoides farinae through the generation of cysteinyl leukotrienes and proinflammatory cytokines, respectively, but a role for Dectin-2 in effector phase responses has not been described. In this study, we demonstrate that administration of the Dectin-2 mAb solely at the time of D. farinae challenge abrogated eosinophilic and neutrophilic inflammation in the bronchoalveolar lavage fluid and Th1, Th2, and Th17 inflammation in the lung of previously sensitized mice. Furthermore, Dectin-2 null mice (Clec4n(-/-)) sensitized with the adoptive transfer of D. farinae-pulsed wild-type (WT) bone marrow-derived dendritic cells (DCs) also had less D. farinae-elicited pulmonary inflammation, supporting an effector function for Dectin-2. The protection from pulmonary inflammation seen with the Dectin-2 mAb or in Clec4n(-/-) mice was associated with little or no reduction in lung-draining lymph node cells or their cytokine production and with no reduction in serum IgE. WT and Clec4n(-/-) mice recipients, sensitized with D. farinae-pulsed WT bone marrow-derived DCs, had comparable levels of D. farinae-elicited IL-6, IL-23, TNF-α, and cysteinyl leukotrienes in the lung. By contrast, D. farinae-elicited CCL4 and CCL8 production from pulmonary CD11c(+)CD11b(+)Ly6C(+) and CD11c(+)CD11b(+)Ly6C(-)CD64(+) monocyte-derived DCs was reduced in Clec4n(-/-) recipients. Addition of CCL8 at the time of D. farinae challenge abrogated the protection from eosinophilic, neutrophilic, and Th2 pulmonary inflammation seen in Clec4n(-/-) recipients. Taken together, these results reveal that Dectin-2 regulates monocyte-derived DC function in the pulmonary microenvironment at D. farinae challenge to promote the local inflammatory response.

Abstract  Sonochemistry is a technique that offers promise for pollutant degradation, but earlier studies on various chlorinated substrates do not give a definitive view of the effectiveness of this methodology. We now report a thorough study of ultrasonic operational variables upon perchloroethylene (PCE) degradation in water (variables include ultrasonic frequency, power and system geometry as well as substrate concentration) and we attempt to close the mass balance where feasible. We obtained fractional conversions of >97% showing very effective loss of pollutant starting material, and give mechanistic proposals for the reaction pathway based on cavitational phenomena inducing pyrolytic and free radical processes. We note major products of Cl(-) and CO(2)/CO, and also trichloroethylene (TCE) and dichloroethylene (DCE) at ppm concentrations as reported earlier. The formation at very low (ppb) concentration of small halocompounds (CHCl(3), CCl(4)) and also of higher-mass species, such as pentachloropropene, hexachloroethane, is noteworthy. But of particular importance in our work is the discovery of significant quantities of chloroacetate derivatives at ppm concentrations. Although these compounds have been described as by-products with other techniques such as radiolysis or photochemistry, this is the first time that these products have been identified in the sonochemical treatment of PCE; this allows a much more effective account of the mass balance and may explain earlier inconsistencies. This reaction system is now better identified, but a corollary is that, because these haloacetates are themselves species of some toxicity, the use of ultrasound here may not sufficiently diminish wastewater toxicity. Copyright © 2010 Elsevier B.V. All rights reserved.

Abstract  An analytical system composed of a cryofocusing trap injector device coupled to a gas chromatograph with mass spectrometric detection (CTI-GC-MS) specific for the on-line analysis in air of volatile chlorinated hydrocarbons (VCHCs) (dichloromethane; chloroform; 1,1,1-trichloroethane; tetrachloromethane; 1,1,2-trichloroethylene; tetrachloroethylene) was developed. The cryofocusing trap injector was the result of appropriate low cost modifications to an original purge-and-trap device to make it suitable for direct air analysis even in the case of only slightly contaminated air samples, such as those from remote zones. The CTI device can rapidly and easily be rearranged into the purge-and-trap allowing water and air analysis with the same apparatus. Air samples, collected in stainless steel canisters, were introduced directly into the CTI-GC-MS system to realize cryo-concentration (at -120 degrees C), thermal desorption (at 200 degrees C) and for the subsequent analysis of volatiles. The operating phases and conditions were customised and optimized. Recovery efficiency was optimized in terms of moisture removal, cold trap temperature and sampling mass flow. The injection of entrapped volatiles was realized through a direct transfer with high chromatographic reliability (capillary column-capillary column). These improvements allowed obtaining limits of detection (LODs) at least one order of magnitude lower than current LODs for the investigated substances. The method was successfully employed on real samples: air from urban and rural areas and air from remote zones such as Antarctica.

Abstract  INTRODUCTION: Emission sources of volatile organic compounds (VOCs*) are numerous and widespread in both indoor and outdoor environments. Concentrations of VOCs indoors typically exceed outdoor levels, and most people spend nearly 90% of their time indoors. Thus, indoor sources generally contribute the majority of VOC exposures for most people. VOC exposure has been associated with a wide range of acute and chronic health effects; for example, asthma, respiratory diseases, liver and kidney dysfunction, neurologic impairment, and cancer. Although exposures to most VOCs for most persons fall below health-based guidelines, and long-term trends show decreases in ambient emissions and concentrations, a subset of individuals experience much higher exposures that exceed guidelines. Thus, exposure to VOCs remains an important environmental health concern. The present understanding of VOC exposures is incomplete. With the exception of a few compounds, concentration and especially exposure data are limited; and like other environmental data, VOC exposure data can show multiple modes, low and high extreme values, and sometimes a large portion of data below method detection limits (MDLs). Field data also show considerable spatial or interpersonal variability, and although evidence is limited, temporal variability seems high. These characteristics can complicate modeling and other analyses aimed at risk assessment, policy actions, and exposure management. In addition to these analytic and statistical issues, exposure typically occurs as a mixture, and mixture components may interact or jointly contribute to adverse effects. However most pollutant regulations, guidelines, and studies remain focused on single compounds, and thus may underestimate cumulative exposures and risks arising from coexposures. In addition, the composition of VOC mixtures has not been thoroughly investigated, and mixture components show varying and complex dependencies. Finally, although many factors are known to affect VOC exposures, many personal, environmental, and socioeconomic determinants remain to be identified, and the significance and applicability of the determinants reported in the literature are uncertain. To help answer these unresolved questions and overcome limitations of previous analyses, this project used several novel and powerful statistical modeling and analysis techniques and two large data sets. The overall objectives of this project were (1) to identify and characterize exposure distributions (including extreme values), (2) evaluate mixtures (including dependencies), and (3) identify determinants of VOC exposure. METHODS VOC data were drawn from two large data sets: the Relationships of Indoor, Outdoor, and Personal Air (RIOPA) study (1999-2001) and the National Health and Nutrition Examination Survey (NHANES; 1999-2000). The RIOPA study used a convenience sample to collect outdoor, indoor, and personal exposure measurements in three cities (Elizabeth, NJ; Houston, TX; Los Angeles, CA). In each city, approximately 100 households with adults and children who did not smoke were sampled twice for 18 VOCs. In addition, information about 500 variables associated with exposure was collected. The NHANES used a nationally representative sample and included personal VOC measurements for 851 participants. NHANES sampled 10 VOCs in common with RIOPA. Both studies used similar sampling methods and study periods. Specific Aim 1. To estimate and model extreme value exposures, extreme value distribution models were fitted to the top 10% and 5% of VOC exposures. Health risks were estimated for individual VOCs and for three VOC mixtures. Simulated extreme value data sets, generated for each VOC and for fitted extreme value and lognormal distributions, were compared with measured concentrations (RIOPA observations) to evaluate each model's goodness of fit. Mixture distributions were fitted with the conventional finite mixture of normal distributions and the semi-parametric Dirichlet process mixture (DPM) of normal distributions for three individual VOCs (chloroform, 1,4-DCB, and styrene). Goodness of fit for these full distribution models was also evaluated using simulated data. Specific Aim 2. Mixtures in the RIOPA VOC data set were identified using positive matrix factorization (PMF) and by toxicologic mode of action. Dependency structures of a mixture's components were examined using mixture fractions and were modeled using copulas, which address correlations of multiple components across their entire distributions. Five candidate copulas (Gaussian, t, Gumbel, Clayton, and Frank) were evaluated, and the performance of fitted models was evaluated using simulation and mixture fractions. Cumulative cancer risks were calculated for mixtures, and results from copulas and multivariate lognormal models were compared with risks based on RIOPA observations. Specific Aim 3. Exposure determinants were identified using stepwise regressions and linear mixed-effects models (LMMs).

RESULTS: Specific Aim 1. Extreme value exposures in RIOPA typically were best fitted by three-parameter generalized extreme value (GEV) distributions, and sometimes by the two-parameter Gumbel distribution. In contrast, lognormal distributions significantly underestimated both the level and likelihood of extreme values. Among the VOCs measured in RIOPA, 1,4-dichlorobenzene (1,4-DCB) was associated with the greatest cancer risks; for example, for the highest 10% of measurements of 1,4-DCB, all individuals had risk levels above 10(-4), and 13% of all participants had risk levels above 10(-2). Of the full-distribution models, the finite mixture of normal distributions with two to four clusters and the DPM of normal distributions had superior performance in comparison with the lognormal models. DPM distributions provided slightly better fit than the finite mixture distributions; the advantages of the DPM model were avoiding certain convergence issues associated with the finite mixture distributions, adaptively selecting the number of needed clusters, and providing uncertainty estimates. Although the results apply to the RIOPA data set, GEV distributions and mixture models appear more broadly applicable. These models can be used to simulate VOC distributions, which are neither normally nor lognormally distributed, and they accurately represent the highest exposures, which may have the greatest health significance. Specific Aim 2. Four VOC mixtures were identified and apportioned by PMF; they represented gasoline vapor, vehicle exhaust, chlorinated solvents and disinfection byproducts, and cleaning products and odorants. The last mixture (cleaning products and odorants) accounted for the largest fraction of an individual's total exposure (average of 42% across RIOPA participants). Often, a single compound dominated a mixture but the mixture fractions were heterogeneous; that is, the fractions of the compounds changed with the concentration of the mixture. Three VOC mixtures were identified by toxicologic mode of action and represented VOCs associated with hematopoietic, liver, and renal tumors. Estimated lifetime cumulative cancer risks exceeded 10(-3) for about 10% of RIOPA participants. The dependency structures of the VOC mixtures in the RIOPA data set fitted Gumbel (two mixtures) and t copulas (four mixtures). These copula types emphasize dependencies found in the upper and lower tails of a distribution. The copulas reproduced both risk predictions and exposure fractions with a high degree of accuracy and performed better than multivariate lognormal distributions. Specific Aim 3. In an analysis focused on the home environment and the outdoor (close to home) environment, home VOC concentrations dominated personal exposures (66% to 78% of the total exposure, depending on VOC); this was largely the result of the amount of time participants spent at home and the fact that indoor concentrations were much higher than outdoor concentrations for most VOCs. In a different analysis focused on the sources inside the home and outside (but close to the home), it was assumed that 100% of VOCs from outside sources would penetrate the home. Outdoor VOC sources accounted for 5% (d-limonene) to 81% (carbon tetrachloride [CTC]) of the total exposure. Personal exposure and indoor measurements had similar determinants depending on the VOC. Gasoline-related VOCs (e.g., benzene and methyl tert-butyl ether [MTBE]) were associated with city, residences with attached garages, pumping gas, wind speed, and home air exchange rate (AER). Odorant and cleaning-related VOCs (e.g., 1,4-DCB and chloroform) also were associated with city, and a residence's AER, size, and family members showering. Dry-cleaning and industry-related VOCs (e.g., tetrachloroethylene [or perchloroethylene, PERC] and trichloroethylene [TCE]) were associated with city, type of water supply to the home, and visits to the dry cleaner. These and other relationships were significant, they explained from 10% to 40% of the variance in the measurements, and are consistent with known emission sources and those reported in the literature. Outdoor concentrations of VOCs had only two determinants in common: city and wind speed. Overall, personal exposure was dominated by the home setting, although a large fraction of indoor VOC concentrations were due to outdoor sources. City of residence, personal activities, household characteristics, and meteorology were significant determinants. Concentrations in RIOPA were considerably lower than levels in the nationally representative NHANES for all VOCs except MTBE and 1,4-DCB. Differences between RIOPA and NHANES results can be explained by contrasts between the sampling designs and staging in the two studies, and by differences in the demographics, smoking, employment, occupations, and home locations. (ABSTRACT TRUNCATED)

Abstract  Halogenated synthetic organic compounds are used in a wide variety of pesticides, solvents, refrigerants, fire retardants, and paints that cause extensive pollution to the air, surface water, groundwater, and soils. Carbon tetrachloride (CCl) is a typical halogenated synthetic organic compound that has been suspected to be toxic and carcinogenic and to cause ozone depletion. In the present work, molecular-level destruction of CCl by copper acetate was investigated by extended X-ray absorption fine structural spectra, X-ray absorption near-edge spectra, X-ray photoelectron spectroscopy, and X-ray diffraction spectroscopy. Experimentally, the Cl species dissociated from CCl were abstracted by copper species and formed CuCl. At 473 to 533 K, reaction products (copper chloride) aggregated on the surfaces of CuO, which might cause the obstruction of further CCl destruction. Due to the insertion of Cl species into the matrix of CuO, the bond distances of Cu-O and Cu-(O)-Cu were increased by 0.3 to 0.4 Å and 0.3 to 0.6 Å, respectively. However, at 603 K, because 79.5% of the Cu was in the CCl destruction solid products, the coordination number of Cu-(O)-Cu increased to 5.6. Molecular level investigations are a key to identifying the mechanisms of the CCl destruction process. In addition, identification of the molecular characteristics of the products may help in safe disposal of the toxic substances. The success of this study paved the way for the destruction of halogenated organic compounds by copper acetate.

Abstract  SUMMARY: Fatty liver disease is common in Western countries. Some patients with this condition develop steatohepatitis, with ongoing liver injury that can lead to cirrhosis. Liver biopsy is currently required to differentiate between uncomplicated fatty liver disease and the more serious condition of steatohepatitis. Salameh and colleagues (1) studied the potential role of MR elastography for this diagnostic task in rat models of simple fatty liver and steatohepatitis. Their results suggest that MR elastography may have a potentially important role for noninvasive early detection of steatohepatitis in patients with fatty liver disease.

Abstract  Adsorption isotherms of chlorobenzene, chloroform and carbon tetrachloride vapors on undoped SiO(2), and metal-doped Ag/SiO(2), Cu/SiO(2) and Fe/SiO(2) substrates were measured in the temperature range of 398-593K. These substrates were prepared from a typical sol-gel technique in the presence of metal dopants that rendered an assortment of microporous-mesoporous solids. The relevant characteristic of these materials was the different porosities and micropore to mesopore volume ratios that were displayed; this was due to the effect that the cationic metal valence exerts on the size of the sol-gel globules that compose the porous solid. The texture of these SiO(2) materials was analyzed by X-ray diffraction (XRD), FTIR, and diverse adsorption methods. The pore-size distributions of the adsorbents confirmed the existence of mesopores and supermicropores, while ultramicropores were absent. The Freundlich adsorption model approximately fitted the chlorinated compounds adsorption data on the silica substrates by reason of a heterogeneous energy distribution of adsorption sites. The intensity of the interaction between these organic vapors and the surface of the SiO(2) samples was analyzed through evaluation of the isosteric heat of adsorption and standard adsorption energy; from these last results it was evident that the presence of metal species within the silica structure greatly affected the values of both the amounts adsorbed as well as of the isosteric heats of adsorption.

Abstract  Effect-air concentration regressions of 48 common solvents (aromatic, aliphatic, and chlorinated hydrocarbons, alcohols, ketones, acetates) were determined for 4-hr inhalation exposures in male rats and for 2-hr exposures in female mice. Inhibition of propagation and maintenance of the electrically evoked seizure discharge was used as a criterion of the acute neurotropic effect. The isoeffective concentrations in air were estimated by interpolation on the level of one-third of the maximum effect (ECC). ECC estimates ranged from 90 to 24,000 ppm and were several times lower than concentrations evoking behavioral inhibition and by one to two orders lower than concentrations inducing narcosis. Correlations between corresponding values in both species were high (r > 0.9), indicating a relative independence of the estimates from experimental conditions. The relative potency estimates had only negligible correlation with octanol:water distribution coefficients or other physicochemical predictors for the whole sample of solvents, but moderate to high correlation (r = 0.5 to 0.9) in homogenous groups of nonpolar solvents, permitting cautious predictions. When applied to known effective concentrations of some solvents on human performance and subjective state, the comparative potency procedure suggests that ceiling and STEL values of some solvents may not reliably protect workers from acute nervous depression.

Abstract  There are many well documented similarities in the anatomy and physiology of mammalian species. There are also numerous examples in which the equilibrium distribution of foreign chemicals in the body appears to follow principles of thermodynamic partitioning with relatively minor interspecies variations to be expected. Information on metabolic pathways and their kinetic characteristics can be obtained from a variety of in vitro systems. It may be possible to use such information in pharmacokinetic models that incorporate existing knowledge and judgment to predict pharmacokinetics in intact animals including man.

Abstract  HEEP COPYRIGHT: BIOL ABS. Excessive leukemia mortality has appeared consistently in epidemiological studies of British and USA rubber industry workers. Attempts to identify causative factors have focused on exposure to benzene and other solvents. Interpretations of findings from these studies have often been influenced by expectations of a benzene/nonlymphocytic leukemia association, seen from previous work in other settings. However, data from the rubber industry studies have not been consistent with this expectation, as lymphocytic and nonlymphocytic leukemia have shown similar mortality excesses. Data from a small case-control study of lymphocytic leukemia are presented to illustrate an approach that considers multiple solvent exposures. The associations with lymphocytic leukemia risk observed for a number of solvents, most notably carbon tetrachloride and carbon disulfide, were stronger than those detected for benzene.

Abstract  Male Fischer or Porton-Wistar rats were exposed for 4 h to different atmospheric concentrations of CCl4 or were given increasing oral doses, of CCl4 in order to estimate isotoxic exposures or doses. Animals were killed 20 h after treatment, their serum glutamic-pyruvic transaminase activities were measured and their livers were processed for histological examination. It has been found that the equitoxic oral dose in Wistars is 1.5 times that in Fischer rats and more than 3 times after inhalation. Therefore, the conversion factors from inhalation exposure to oral dose were much higher for Fischer than for Porton-Wistar rats. After oral dosing, the extent of centrilobular damage in Fischer rats was approximately twice that in Porton-Wistar rats. After inhalation exposure, the extent of damage was the same in the two strains, but at least at the two lower exposure levels hydropic degeneration definitely contributed to the size of the damaged areas more in Porton-Wistar than in Fischer rats.

Abstract  Rats, guinea pigs, dogs, rabbits, and monkeys were exposed to trichloroethylene, carbon tetrachloride, 1,1,1-trichloroethane, dichlorodifluoromethane, and 1,1-dichloroethylene. Two types of inhalation experiments were conducted: continuous exposure for 90 days and 8-hour exposures, 5 days a week, for a total of thirty exposures. The parameters studied included mortality, visible signs of toxicity, and hematologic, biochemical, pathologic, and body weight changes. Throughout this entire study which encompassed 17 separate exposures over a period of nearly four years, no visible signs of toxicity were noted in any species exposed to these materials. Significant mortality was found in both the repeated (515 mg/m3) and continuous (61 mg/m3) exposures to carbon tetrachloride as well as in the continuous exposures to 1,1-dichloroethylene at 189, 101, and 61 mg/m3. Growth depression in varying degrees was found in all continuous exposures involving trichloroethylene, carbon tetrachloride, and 1,1-dichloroethylene and in the repeated exposures to carbon tetrachloride. No significant hematologic alterations were noted in any of the studies. No biochemical studies were done in the earlier years and hence no biochemical data were obtained from the animals exposed to trichloroethylene and dichlorodifluoromethane. Serum urea nitrogen levels were within control limits in all of the exposures to carbon tetrachloride, 1,1-dichloroethylene, and 1,1,1-trichloroethane in which determinations were made. Liver lipid contents in guinea pigs were found to be significantly elevated following repeated exposure to 515 mg/m3 of carbon tetrachloride. Significant elevations of serum glutamic-pyruvic transaminase and liver alkaline phosphatase activities were found in rats and guinea pigs following continuous exposure to 189 mg/m3 of 1,1-dichloroethylene. Histopathologic study revealed liver damage following continuous exposures to high levels of dichlorodifluoromethane (3997 mg/m3), and to lower levels of carbon tetrachloride (61 mg/m3), and 1,1-dichloroethylene (189 mg/m3). Similar liver damage was also found in the repeated exposures to the two latter materials at 515 mg/m3 and 395 mg/m3, respectively.

Abstract  The mechanisms responsible for ethanol-mediated teratogenesis have not been resolved. However, possible etiologies include the local formation of the teratogen acetaldehyde or oxygen radicals by fetal ethanol-oxidizing enzymes. As alcohol dehydrogenases are expressed at very low concentrations in human embryonic tissues, the ethanol-inducible P450 enzyme, CYP2E1, could be the sole catalyst of fetal ethanol oxidation. With this in mind, we examined the expression of this P450 in liver samples from fetuses ranging in gestational age from 16 to 24 weeks. Immunoblot analysis of fetal liver microsomes revealed the presence of a protein immunoreactive with CYP2E1 antibodies that exhibited a slightly lower molecular weight than that found in adult liver samples. Embryonic CYP2E1 expression was further confirmed by the reverse transcriptase reaction with RNA from a 19-week gestational fetal liver used as template. Catalytic capabilities of human fetal microsomes were assessed by measurement of the rate of ethanol oxidation to acetaldehyde, which were 12-27% of those exhibited by adult liver microsomes. Immunoinhibition studies with CYP2E1 antibodies revealed that the corresponding antigen was the major catalyst of this reaction in both fetal and adult tissues. We then assessed whether embryonic CYP2E1 was, like the adult enzyme, inducible by xenobiotics. Treatment of primary fetal hepatocyte cultures with either ethanol or clofibrate demonstrated a 2-fold increase in CYP2E1 levels compared with untreated cells. Collectively, our results indicate that CYP2E1 is present in human fetal liver, that the enzyme is functionally similar to CYP2E1 from adults, and that fetal hepatocyte CYP2E1 is inducible in culture by xenobiotics, including ethanol. Because fetal CYP2E1 mediates ethanol metabolism, the enzyme may play a pivotal role in the local production of acetaldehyde and free radicals, both of which have potential deleterious effects on the developing fetus.

Abstract  Forty-six coded chemicals were tested for their ability to induce sister chromatid exchanges (SCEs) and chromosomal aberrations (ABs) in cultured Chinese hamster ovary (CHO) cells using a standard protocol with and without exogenous metabolic activation. Sixteen chemicals were negative and 15 were positive in both assays; 15 were positive for SCEs only (one chemical that was positive for SCEs was equivocal for ABs), and no chemicals induced ABs only. The effect of cell harvest time on the ability to detect the induction of ABs was examined for 18 chemicals. Seven chemicals produced a positive response using both standard and extended harvest times, five were positive only using an extended harvest time, and six were negative using both harvest times. The relationship between cell cycle delay and SCE induction was also examined, and the two appear to be unrelated.

Abstract  A physiologically based pharmacokinetic model which describes the behavior of inhaled styrene in rats accurately predicts the behavior of in baled styrene in humans. The model consists of a series of mass-balance differential equations which quantify the time course of styrene concentration within four tissue groups representing (1) highly perfused organs, (2) moderately perfused tissues such as muscle. (3) slowly perfused fat tissue, and (4) organs with high capacity to metabolize styrene (principally liver). The pulmonary compartment of the model incorporates uptake of styrene controlled by ventilation and perfusion rates and the blood:air partition coefficient The metabolizing tissue group incorporates saturable Michaelis-Menten metabolism controlled by the biochemical constants Vmax and Km. With a single set of physiological and biochemical constants, the model adequately simulates styrene concentrations in blood and fat of rats exposed to 80, 200, 600, or 1200 ppm styrene (data from previously published studies). The simulated behavior of styrene is particularly sensitive to changes in the constants describing the fat tissue group, and to the maximum metabolic rate described by Vmax, The constants used to simulate the fate of stvrene in rats were scaled up to represent humans. Simulated styrene concentrations in blood and exhaled air of humans are in good agreement with previously published data. Model simulations show that styrene metabolism is saturated at inhaled concentrations above approximately 200 ppm in mice, rats, and humans. At inhaled concentrations below 200 ppm, the ratio of styrene concentration in blood to inhaled air is controlled by perfusion limited metabolism. At inhaled concentrations above 200 ppm. This ratio is controlled by the blood:air partition coefficient and is not linearly related to the ratio attained at lower (nonsaturating) exposure concentrations. These results show that physiologically based pharmacokinetic models provide a rational basis with which (1) to explain the relationship between blood concentration and air concentration of an inhaled chemical, and (2) to extrapolate this relationship from experimental animals to humans.

Abstract  Partition coefficients are required for developing physiologically based pharmacokinetic models used to assess the uptake, distribution, tabolism, and elimination of volatile chemicals in mammals. A gas-phase vial equilibration technique is presented for determining the liquid:air and tissue:air partition coefficients for low-molecular-weight volatile chemicals. This technique was developed from two previously described medium:air methods, relied solely on measurement of chemical concentration in the gas phase, and, compared to earlier work, extends the range of chemicals and tissues examined. Partition coefficients were determined with 0.9% saline, olive oil, and blood, liver, muscle, and fat tissues from rats for 55 compounds. Human blood:air coefficients were determined for 36 compounds and several blood:air values were also determined in the mouse and for one compound in the hamster. An approach is described for predicting the tissue solubilities of untested compounds based on oil:air and saline:air coefficients using regression analyses. A similar approach is used to model fat:air coefficients in terms of oil:air values and to model human blood: air coefficients in terms of rat blood:air coefficients.

Abstract  Workplace air samples from sintering, cokemaking, and hot and cold forming processes in the integrated iron and steel industry were analyzed to determine their volatile organic compound (VOC) concentration. Sixteen VOC species including three paraffins (cyclohexane, n-hexane, methylcyclohexane), five chlorinated VOC species (trichloroethylene, 1,1,1-trichloroethane, tetrachloroethylene, chlorobenzene, 1,4-dichlorobenzene), and eight aromatics (benzene, ethylbenzene, styrene, toluene, m,p-xylene, o-xylene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene) were selected to measure their noncancer risk for workers. Concentrations of toluene, xylene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, dichlorobenzene, and trichloroethylene were high in all four processes. Carbon tetrachloride and tetrachloroethylene concentrations were high in the hot and cold forming processes. The noncancer risk followed the increasing order: cokemaking > sintering > hot forming > cold forming. 1,2,4-trimethylbenzene and 1,3,5-trimethylbenzene contributed 44% to 65% and 13% to 20% of noncancer risk, respectively, for the four processes. Benzene accounted for a high portion of the noncancer risk in cokemaking. The hazard index (HI: 17-108) of the average VOC concentrations suggests that health risks can be reduced by improving workplace air quality and protecting workers.